Skip to content

Tadano Faun ATF 60-3

All-terrain crane. Drives on public roads and works on site.

60 t

Max capacity at 2.5 m radius · Manufacturer rating

The back of a yellow Faun all-terrain crane by the sea, outriggers extended, with black and white stripes on the beams.

Key figures. From the manufacturer, beside the other four models.

Max capacity

60 t

At 2.5 m radius · Manufacturer rating

Max capacity of the five models

  1. RT700E55 t
  2. ATF 60-360 t
  3. AC200-1200 t
  4. QUY250250 t
  5. GMK6350317.5 t

Max boom length

40.2 m

Main boom: 10.4–40.2 m

Longest of the five: 72.2 m, QUY250.

Longest jib

16 m

Longest of the five: 61 m, GMK6350.

Counterweight

13.2 t

Heaviest of the five: 100 t, GMK6350.

Tadano Faun ATF 60-3 photos.

  1. All-terrain crane beside a tipper trailer

    A yellow Faun all-terrain crane with its boom raised on a sandy shore, ringed by traffic cones and barrier tape, with a tipper trailer beside it.

    Coastal site · 1 of 2

  2. All-terrain crane with the sea behind

    A yellow Faun crane marked "ATF 60-3" on its cab, seen past a grey steel structure on a sandy shore, with the sea on the left.

    Coastal site · 2 of 2

Manufacturer specification

These are the manufacturer's figures for this model, not figures Atlas Alshraa has confirmed for its own cranes.

Lifting

Max capacity
60 t
At radius
2.5 m
Counterweight
13.2 t

Boom and jib

Main boom
10.4–40.2 m
Longest jib
16 m
Tip height with jib
58.4 m (from a spec database)

Carrier

Axles
3
Drive
6x6

Engine and travel

Engine
Mercedes-Benz OM 926 LA
Engine power
240 kW
Top road speed
80 km/h
Gradeability
66 %

Dimensions and weights

Basic weight
36 t

About this rating

60 t is over the rear at 2.5 m with additional equipment; over the standard working range the chart shows 55 t at 2.5 m.

Where the figures come from

* From a spec database, not from the manufacturer’s own document.

Will it lift your load?

60 t is its maximum, and only at its shortest radius, 2.5 m. Further out or higher up, it lifts less. Send us the weight, the radius and the lift height, and we will check the load chart with you.

What we need from you

  1. Load weight (t)
  2. Lift radius (m)
  3. Lift height (m)